This NAS supports hot swapping the disks, so I don’t need to do any prep or power it down – just make sure you have a backup in case it all goes wrong (which you should have anyway if you care about the data). Device was running DSM 6 when the volume was created and migrated to DSM 7 successfully a few months ago. I have a 4 drive (12TB) array that all of a sudden went read-only & has now 'crashed' so that it isnt mouting any file system. You cant create a new storage pool without losing all the data on the volume because that volume is not longer reliable or usable. the filesystem has experienced a failure, or. Synology have an article on what to do to replace a disk with a larger one, which is worth reading for other considerations around the process: Would really appreciate some help with unpicking what might have happened here. before even opening the box i noticed that the serial number that was Xed out was not the same as the synology sticker with s/n and mac address on the box. If the pool has crashed, its because: the drive hardware has experienced a failure, or. WD and Seagate should still honour the warranty anyway if a drive fails later, and I’ve done this on a shucked WD drive before successfully). (Note that before removing, I always test the drive to make sure it’s not DOA. Enter your DSM password and click Submit. Tick the checkbox to confirm that you want to proceed and click OK. Select the drive and click Action > Deactivate Drive. which can be used as network-attached storage (NAS). This time I’ve bought an 18TB WD drive, which takes about two minutes to remove from it’s case. Do the following according to your DSM version: DSM 7 and above Put the drive that was removed by accident back into your Synology NAS. 5 Synology RT2600ac Dual-Band Gigabit Wi-Fi Router Lifewire / Jeremy Laukkonen What We Like Long. All my disks in the unit are shucked from Western Digital (WD) or Seagate external enclosures – because it’s cheaper to do that than buy disks outright. Rather than waiting until it actually runs out, I decided it was time to upgrade one of the drives.īecause I’m running SHR RAID, I can have different sized disks. My Synology DiskStation DS1621xs+ (originally provided by Synology, thank you!) is at 89% full.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |